Milan M15B 2200 Watt 15" Powered Subwoofer
The Milan M15B is compact powered 15” bandpass subwoofer that extends the frequency range and increases the overall loudness of any Milan system.
The bandpass design produces high bass energy within the pass band, which is tuned to reinforce bass instrument frequencies, and the steep cut-off slopes ensure an effective acoustic transition to Milan full-range loudspeakers.
The onboard amplifier provides over 2,200 watts of maximum output power with plenty of headroom to power the long-excursion bass driver, allowing short term transients to be reproduced with wide dynamic range. Two discrete balanced XLR inputs plus corresponding thru connections on balanced male XLR allow a stereo system comprising of two Milan full-range loudspeakers to be operated with only one subwoofer if required, the sub-bass frequencies being filtered and summed to the subwoofer drive unit. A switchable 3 dB boost is available at a centre frequency between 40 Hz and 90 Hz, while an overall level control allows the sub-bass frequencies to be balanced with the system. A polarity switch is provided for optimum subwoofer integration. Rear panel LEDs indicate power on, signal present, and the onset of limiting action.
|Dimensions (H x W x D)
||495 x 530 x 480 mm (19.5 x 20.9 x 18.9")
||37 kg (81.4 lbs)
||1 x 15" (381 mm) LF driver
||45 Hz - 100 Hz ±3 dB
|Calculated Max SPL
||134 dB peak (half space)
||Birch plywood, screwed and glued
Input: 2 x female XLR wired pin2 hot
Thru: 2 x male XLR wired pin 2 hot
IEC mains connector with integrated fuseholder
|Spares & Accessories
LS-1535 15" (381 mm) low frequency driver
RC-1535 Recone kit