Instant Layered Masterpieces
DITTO MIC LOOPER lets you go from idea to performance with ease in a flash. One knob, two buttons – it couldn’t be simpler! With its superior audio quality, unlimited overdubs and Undo/Redo, DITTO MIC LOOPER is the essential choice for looping vocals and instruments.
New: Intelligent Mic Gain
Using DITTO MIC LOOPER is exactly like plugging your mic directly into the PA and you only need to set input gain once – at the mixer. No more trial-and-error tinkering to find the optimal balance between input gain on your effects unit and the mixing desk.
It’s this Simple...
• Press LOOP to record. Press again to play the loop. Repeat for endless overdubs. Hold to undo/redo latest overdub.
• Press STOP to stop all loops, press again to restart play from the beginning – or hold it for a quick, noiseless erase.
...and this Versatile
As a singer, beatboxer, horn-blower, percussionist or string-player, the power and musical ease of DITTO MIC LOOPER simply cannot be overstated. Even the faintest musical idea can be explored, built up, torn down and just plain enjoyed in private, practice or performance.
The Magic of Two Switches
The dedicated STOP switch on DITTO MIC LOOPER lets you pause your loop exactly where you want, without having to double-tap to stop and fudge your timing – as with some competing loopers. This means your LOOP button is totally focussed on your looping creation with Record/Play/Overdub functions.
Pure Looping – Without the Fluff
- Intelligent Mic Input Gain for Quick and Painless Setup
- Built In Mic Control, Infinite Overdubs and Loop Storage
- Intuitive LED Indicator for Modes and Dedicated Loop Switches
- Quiet Mic Preamp with Phantom Power, Balanced XLR Out, Power & USB for Updates
Chain FX into Your Loop
You can use DITTO MIC LOOPER with other vocal processors like TC HELICON’s Harmony Singer or Mic Mechanic. Add effects into the chain before DITTO MIC LOOPER to alter the sound of your loop and even change sounds between layers. Or, add your effects to the chain after DITTO MIC LOOPER to sonically change your loop at any moment.
Under the Hood
DITTO MIC LOOPER carries with it the high-fidelity hallmark of the entire DITTO family – 24-bit uncompressed (and uncompromised) audio. Paired with a great-sounding mic preamp and phantom power to boot, you are free to use any of your favorite dynamic and condenser mics.
More Mic, More Control
You can completely control DITTO MIC LOOPER from your mic – simply plug in a TC HELICON MP-75 microphone or Sennheiser e835 FX (both sold separately). We call it Mic Control™, and it allows you to command both the stage – and the audience!
Design
| Size | Height: 5.4 inches (140 mm)
Width: 3.5 inches (90 mm) Depth: 2.3 inches (60 mm) |
| Weight | Weight: 0.92 lb. (0.42 kg) |
| Construction | Two part dies cast metal
Rubberized base |
Connections
| Analog Inputs | Input Connector: XLR Female, balanced
Input Impedance: 2.7 kOhm balanced Maximum Input Level: -1 dBu Signal to Noise Ratio: 112 dB A-weighted Phantom Power: 32V (always on) |
| Analog Outputs | Output Connector: XLR Male, balanced
Output Impedance: 250 Ohms balanced Maximum Output Level: -1 dBu Dynamic Range: >104 dB, 20 Hz to 20 kHz Frequency Response: +0/-0.3 dB, 20 Hz to 20 kHz |
| Control | USB for firmware and control
Mic Control using TC Helicon MP-75 Microphone or Sennheiser e835 FX mic |
Safety And Regulations
| Power | Power Supply (Supplied): 12V .4A
Power Consumption: 5.6W |
| Safety | EMC – Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
Safety – certified to IEC 65, EN 60065, UL6500 and CSA IEC 65, EN 60065, UL6500 and CSA |
| Environment | Operating Temperature: 32°F to 122°F (0°C to 50°C)
Storage Temperature: -22°F to 167°F (-30°C to 70°C) Humidity: Max. 90 % non-condensing |
| What's in the box? | Region specific power supply
USB cable User guide |
