2500 Watt 2 Way 12" Full Range Powered Loudspeaker with Klark Teknik DSP Technology and ULTRANET Networking

NuQ122-AN

Whatsapp for enquiry







The 2 way full range NuQ122-AN is a 2,500 Watt 12" powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the NuQ122-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications. The NuQ122 loudspeaker features a 12" low frequency driver with a low mass voice coil for improved transient response and an aluminium dome 1" neodymium high frequency compression driver, which is mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide. Output power for the NuQ122-AN is provided by means of an efficient and lightweight Klark Teknik 2,500-Watt Class-D power amplifier. A sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability. On the rear panel of the amplifier module, the user interface's LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ122-AN via PC computer, as well as DSP firmware updates.

ULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.

Finished in a highly durable semi matt black paint, the trapezoidal cabinet is constructed from 15 mm (5⁄8") birch plywood – and includes a rugged powder coated perforated steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ122-FY flying yoke kit provides added flexibility in permanent install applications (available separately). The NuQ122-AN also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport. Mains power input is provided via a Neutrik powerCON* connector.

  • 2 way full range powered loudspeaker for portable PA and installation applications
  • 2,500 Watt power featuring KLARK TEKNIK Class-D technology
  • KLARK TEKNIK Digital Signal Processing for total system control
  • ULTRANET digital audio networking connects to mixers and other sources
  • 12" low frequency driver with low mass voice coil for improved transient response
  • Aluminium dome 1" neodymium motor compression driver
  • Low distortion waveguide provides 70° H x 70° V dispersion
  • Fully featured user interface with LCD display for ease of navigation
  • PC remote control software downloadable at turbosound.com
  • 15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
  • Rugged powder coated perforated steel mesh grille
  • Integral 35 mm pole mount and handles
  • Multiple internal rigging points allow bracket mount and suspension in any orientation
  • Mains input on Neutrik powerCON* connector
  • Designed and engineered in the U.K.


System

Frequency Response 55 Hz – 18 kHz ±3 Db
50 Hz – 20 kHz -10 dB
Nominal Dispersion 70° H x 70° V @ -6 dB points
Maximum SPL 131 dB peak
Crossover Type Active
Transducers 1 x 12" ( 315.5) LF driver
1 x 1" (25.4 mm) HF compression driver
Limiter Independent HF, LF, peak and rms

Amplifier

Maximum Output Power* 2,500 W

Connectors

Input/link 1 x Combo Jack/XLR 1 x XLR
Ultranet input/link 2 x RJ45
Mains Supply Neutrik powerCON 20A†

Controls

DSP Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter

User DSP Functions

Factory EQ Presets Positioning, Sound mode, FBQ
Display LCD 128 x 32, blue, backlit
Delay 0 - 300 ms
Equalisation High and low shelving EQ 2 x parametric EQ
Limiter Zero attack input limiter
Presets 20 total presets, 19 user-definable
Crossover High Pass L-R 24 dB/oct
Protection Lock-out function for all settings

Ultranet Digital Network

Digital processing  
System  
Cabling  

Power Supply

Power consumption 90 W @ 1/8 max power
Voltage (fuses)  

Enclosure

Dimensions HWD 656 x 374 x 340 mm (25.8 x 14.7 x 13.4")
Net weight 20.2 kg (44.5 lbs)
Construction 15 mm (5/8") birch plywood
Finish Semi matt black paint
Grille Powder coated perforated steel
Flying hardware M10 x 8 points

Accessories

  NuQ122-FY flying yoke for NuQ122


YOU MIGHT ALSO LIKE